18
•
START ZOOM : Use the left or right button in the ‘START ZOOM’ item to select the zoom
position from 1x to 27x (or 33x) to be returned after the ‘SMART ZOOM’ action is over.
•
TARGET ZOOM : Use the left or right button in the ’TARGET ZOOM’ item to select the
zoom position from 1x to 27x (or 33x) to be used during motion detection.
•
DWELL TIME : Use the left or right button in the ‘DWELL TIME’ item to select a time
between 5 and 60 seconds for the dwell time before the zoom is returned to the ‘START
ZOOM’ position. (5, 7, 10, 15, 20, 30, 40, 60 sec)
•
TOP, BOTTOM, LEFT, RIGHT buttons : You can adjust the size of the area.
☞
Notes
Tips on Using the Motion Detection Feature
• The feature may not function properly under flickering light conditions.
• The camera interprets sudden changes in lighting and subsequent change in brightness
of an object as motion.
• With the feature enabled, other algorithms may require additional time to operatethan
usual.
• This system does not guarantee prevention of fire or theft. The manufacturer shall not be
held responsible for any accident or damage incurred.
• Connect an external alarm device to MD Out on back of the camera.
• Be careful of that MD Out can be appeared according to the moving of zoom.
FOCUS
1. Press the SET button to access the main setup manu and then position the indicator
over FOCUS using the UP or DOWN button.
2. Press the SET button.
▶
MODE :
You can select the most suitable zoom mode. Move the arrow indicator to
‘MODE’ by using UP or DOWN button. Digital zoom is operated after optical zoom (x27,
x33, x37) is finished.
MAIN SETUP
SSDR ON
↙
WHITE BAL ATW
BACKLIGHT OFF
MOTION DET OFF
FOCUS
↙
EXPOSURE
↙
SPECIAL
↙
RESET
EXIT