DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
196
DES-3526:4# config ssh server maxsession 2 contimeout 300 authfail 2
Command: config ssh server maxsession 2 contimeout 300 authfail 2
Success.
DES-3526:4#
show ssh server
Purpose
Used to display the SSH server setting.
Syntax
show ssh server
Description
This command allows you to display the current SSH server setting.
Parameters None.
Restrictions None.
Usage Example:
To display the SSH server:
DES-3526:4# show ssh server
Command: show ssh server
The SSH server configuration
max Session : 8
Connection timeout : 300
Authfail attempts : 2
Rekey timeout : never
port : 22
DES-3526:4#
config ssh user
Purpose
Used to configure the SSH user.
Syntax
config ssh user <username 15> authmode {hostbased
[hostname <domain_name> | hostname_IP <domain_name>
<ipaddr>} | password | publickey]
Description
This command allows you to configure the SSH user authentication
method.
Parameters
<username 15>
- Enter a username of no more than 15 characters
to identify the SSH user.
authmode
– Specifies the authentication mode of the SSH user
wishing to log on to the Switch. The administrator may choose
between:
•
hostbased
– This parameter should be chosen if the user
wishes to use a remote SSH server for authentication
purposes. Choosing this parameter requires the user to input
the following information to identify the SSH user.
hostname <domain_name>
- Enter an
alphanumeric string of up to 32 characters
identifying the remote SSH user.
hostname_IP <domain_name> <ipaddr>
- Enter the
hostname and the corresponding IP address of the
SSH user.
•
password – This parameter should be chosen to use an
