DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
15
enable clipaging
Purpose
Used to pause the scrolling of the console screen when the show
command displays more than one page.
Syntax
enable clipaging
Description
This command is used when issuing the show command which
causes the console screen to rapidly scroll through several pages.
This command will cause the console to pause at the end of each
page. The default setting is enabled.
Parameters
None.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To enable pausing of the screen display when the show command output reaches the end of the page:
DES-3526:4#enable clipaging
Command: enable clipaging
Success.
DES-3526:4#
disable clipaging
Purpose
Used to disable the pausing of the console screen scrolling at the
end of each page when the show command displays more than one
screen of information.
Syntax
disable clipaging
Description
This command is used to disable the pausing of the console screen
at the end of each page when the show command would display
more than one screen of information.
Parameters
None.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To disable pausing of the screen display when show command output reaches the end of the page:
DES-3526:4#disable clipaging
Command: disable clipaging
Success.
DES-3526:4#
enable telnet
Purpose
Used to enable communication with and management of the Switch
using the Telnet protocol.
Syntax
enable telnet <tcp_port_number 1-65535>
Description
This command is used to enable the Telnet protocol on the Switch.
The user can specify the TCP or UDP port number the Switch will
use to listen for Telnet requests.
