DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
94
DES-3500:admin# config traffic control 1-12 broadcast enable action shutdown
threshold 1 countdown 10 time_interval 10
Command: config traffic control 1-12 broadcast enable action shutdown
threshold 1 countdown 10 time_interval 10
Traffic control port_list (shutdown mode) : 1
Warning!
Shutdown mode is incompatible with drop mode in the same block(ex. Port 1-8)
Success.
DES-3500:admin#
NOTE:
When configuring the traffic control for shutdown mode, the
storm_grouplist
will be
defined as a port, not as a group of ports. So when the user enters a command like “
config
traffic control 1 broadcast enable action shutdown”
, the traffic control shutdown mode will
only be configured for port 1, NOT for group 1 (ports 1-8). Any other configuration entered will
apply to the
group_list
, not per individual port. The previous example is defining a port list to be
configured. The following example defines a group list to be configured.
To configure traffic control and enable broadcast storm control for group_list 1 (ports 1-8):
DES-3500:admin# config traffic control 1 broadcast enable threshold 10
Command: config traffic control 1 broadcast enable threshold 10
Traffic control port_list (shutdown mode) : 1-8
Warning!
Shutdown mode is incompatible with drop mode in the same block(ex. Port 1-8)
Success.
DES-3500:admin#
show traffic control
Purpose
Used to display current traffic control settings.
Syntax
show traffic control {[group_list <storm_grouplist> | port
<portlist>]}
Description
This command displays the current storm traffic control configuration on
the Switch.
Parameters
group_list <storm_grouplist> -
Entering this parameter will display the
traffic control settings by group list as defined below.
Group 1 – Inclusive for ports 1-8.
Group 2 - Inclusive for ports 9-16.
Group 3 - Inclusive for ports 17-24.
Group 4 - Inclusive for ports 9-16 (DES-3550). Inclusive for Gigabit
port 25 (DES-3526).
Group 5 - Inclusive for ports 33-40 (DES-3550). Inclusive for Gigabit
port 26 (DES-3526).
Group 6 - Inclusive for ports 41-48 (DES-3550 only).
Group 7 - Inclusive for Gigabit port 49 (DES-3550 only).
Group 8 - Inclusive for Gigabit port 50 (DES-3550 only).
port <portlist>
- Used to specify port or list of ports for which to display
traffic control settings. The beginning and end of the port list range are
