5 Configuration
D-Link Web Smart Switch User Manual
Figure 73 – Configuration > Link Aggregation > Port Trunking
ort you configured in 802.1Q VLAN setting page will be the static
.
Click
Apply
to implement chang
Auto Surveillance VLAN State:
Select to enable or disable Auto Surveillance VLAN. The default is
Enabled.
VLAN ID:
By default, the VLAN ID 1 was created as Surveillance VLAN and all ports are member ports. You
also can create another Surveillance VLAN by selecting a VLAN ID that you have created a VLAN from the
802.1Q VLAN page. The member p
member port of surveillance VLAN.
Priority:
The 802.1p priority levels of the traffic in the surveillance VLAN
es of Auto Surveillance global settings
Note:
By default, the priority of Auto Surveillance
VLAN is highest. It is recommended changing the
priority to high when Auto Voice VLAN is also
enabled to guarantee the quality of VoIP traffic.
nce Devices. Usually, VMS and VMS Clients are two necessary components
AC address is 5. System will auto generate an ACL profile (Profile ID: 56) for all the
dd
to create a new surveillance component and
Refresh
to refresh the surveillance VLAN summary
ble.
Component Type:
Surveillance VLAN will automatically detect D-Link Surveillance Devices by default.
There are another five surveillance components that could be configured to be auto-detected by surveillance
VLAN. These five components are Video Management Server (VMS), VMS Client, Video Encoder, Network
Storage and Other IP Surveilla
for an IP surveillance service.
Description:
Here to input the description for the component.
MAC Address:
You can manually create an MAC address for the surveillance component. The maximum
number of user defined M
surveillance VLAN rules.
Click
A
ta
Configuration > Link Aggregation > Port Trunking
The Trunking function enables the combining of two or more ports together to increase bandwidth. Up to
eight Trunk groups may be created, and each group can be consisted of up to eight ports. Select the ports to
be grouped together, and then click
Apply
to activate the selected Trunking groups. Two types of link
aggreg
Static -
Static link aggregation.
ation can be selected:
4
4
1
1
Summary of Contents for Web Smart DES-1210-28P
