manualshive.com logo in svg

D-Link Web Smart DES-1210-28P, Reference Manual

The D-Link Web Smart DES-1210-28P is a high-performance switch designed for small and medium-sized businesses. With its advanced features and 24 Power over Ethernet ports, it provides seamless connectivity and power to IP cameras, VoIP phones, and wireless access points. Download the free user manual with detailed specifications at manualshive.com.

Share
Download
background image

Table of Contents  

D-Link Web Smart Switch User Manual

 

Table of Contents 

Table of Contents ............................................................................................................................................. i

 

About This Guide............................................................................................................................................. 1

 

Terms/Usage.................................................................................................................................................. 1

 

Copyright and Trademarks ............................................................................................................................ 1

 

Product Introduction ....................................................................................................................................... 2

 

DES-1210-08P ............................................................................................................................................... 3

 

Front Panel ................................................................................................................................................. 3

 

Rear Panel.................................................................................................................................................. 3

 

DES-1210-28 ................................................................................................................................................. 3

 

Front Panel ................................................................................................................................................. 3

 

Rear Panel.................................................................................................................................................. 4

 

DES-1210-28P ............................................................................................................................................... 4

 

Front Panel ................................................................................................................................................. 4

 

Rear Panel.................................................................................................................................................. 5

 

DES-1210-52 ................................................................................................................................................. 5

 

Front Panel ................................................................................................................................................. 5

 

Rear Panel.................................................................................................................................................. 6

 

Hardware Installation ...................................................................................................................................... 7

 

Step 1: Unpacking.......................................................................................................................................... 7

 

Step 2: Switch Installation.............................................................................................................................. 7

 

Desktop or Shelf Installation....................................................................................................................... 7

 

Rack Installation ......................................................................................................................................... 7

 

Step 3 – Plugging in the AC Power Cord....................................................................................................... 8

 

Power Failure ............................................................................................................................................. 9

 

Getting Started............................................................................................................................................... 10

 

Management Options................................................................................................................................... 10

 

Using Web-based Management .................................................................................................................. 10

 

Supported Web Browsers ........................................................................................................................ 10

 

Connecting to the Switch.......................................................................................................................... 10

 

Login Web-based Management ............................................................................................................... 11

 

Smart Wizard ............................................................................................................................................... 11

 

Web-based Management............................................................................................................................. 11

 

SmartConsole Utility..................................................................................................................................... 11

 

SmartConsole Utility ..................................................................................................................................... 13

 

SmartConsole Settings ................................................................................................................................ 13

 

Utility Settings........................................................................................................................................... 13

 

Log............................................................................................................................................................ 14

 

Trap .......................................................................................................................................................... 14

 

File ............................................................................................................................................................ 14

 

Help .......................................................................................................................................................... 15

 

Device Configuration.................................................................................................................................... 16

 

Add(+), Delete(-) and Discover the device ............................................................................................... 18

 

Device List.................................................................................................................................................... 18

 

Configuration ................................................................................................................................................. 20

 

Smart Wizard Configuration......................................................................................................................... 20

 

Password Settings.................................................................................................................................... 20

 

SNMP Settings ......................................................................................................................................... 21

 

i

i

 

 

Summary of Contents for Web Smart DES-1210-28P






















































































Reviews:

No comments

Related manuals for Web Smart DES-1210-28P

4RF Aprisa LTE Quick Start Manual preview
Aprisa LTE
Brand: 4RF Pages: 7
Cabletron Systems Netlink FRX8000 Installation And Setup Manual preview
Netlink FRX8000
Brand: Cabletron Systems Pages: 94
Cabletron Systems MMAC-Plus 9E423-24 Reference Manual preview
MMAC-Plus 9E423-24
Brand: Cabletron Systems Pages: 10
Cabletron Systems MMAC-Plus 9A128-01 Management Manual preview
MMAC-Plus 9A128-01
Brand: Cabletron Systems Pages: 22
Cabletron Systems Spectrum EMM-E6 Addendum Manual preview
Spectrum EMM-E6
Brand: Cabletron Systems Pages: 2
Cabletron Systems SmartSTACK ELS100-24TXG Installation And User Manual preview
SmartSTACK ELS100-24TXG
Brand: Cabletron Systems Pages: 112
Cabletron Systems ESX-1380 Management Manual preview
ESX-1380
Brand: Cabletron Systems Pages: 86
Cabletron Systems DLM6C-AA Overview And Setup Manual preview
DLM6C-AA
Brand: Cabletron Systems Pages: 54
Cabletron Systems Cabletron BRIM-F6 User Manual preview
Cabletron BRIM-F6
Brand: Cabletron Systems Pages: 43
Cabletron Systems Netlink FRX4000 Maintenance Manual preview
Netlink FRX4000
Brand: Cabletron Systems Pages: 60
Cabletron Systems CSX200 CyberSWITCH Setup Manual preview
CSX200 CyberSWITCH
Brand: Cabletron Systems Pages: 2
Cabletron Systems 9E132-15 Appendix preview
9E132-15
Brand: Cabletron Systems Pages: 8
Cabletron Systems TRXI-22 Addendum preview
TRXI-22
Brand: Cabletron Systems Pages: 4
Icidu NI-707533 Manual Manual preview
NI-707533
Brand: Icidu Pages: 10
XESS XStend XS40 User Manual preview
XStend XS40
Brand: XESS Pages: 23
D-Link G416 User Manual preview
G416
Brand: D-Link Pages: 176
Hawking CF100W Specifications preview
CF100W
Brand: Hawking Pages: 2
FS FS-BOX-V3 Quick Start Manual preview
FS-BOX-V3
Brand: FS Pages: 19

Brands by name

Popular brands

Load more brands