17
D-Link DIR-508L User Manual
Section 3 - Configuration
Internet
Broadband Ethernet
•
Click on the Internet icon to display the IPv4 network details
below the diagram. You can view the IPv6 details by clicking
at the top right.
•
Click on
DHCP Release
if you wish to disconnect from the
Internet.
•
To reconnect to the Internet, you may click the Internet icon
and then click
Connect
in the pop-up dialog to enable DHCP.
Note:
This information will be saved as an xDSL Broadband
(PPPoE) Internet Profile for future use.
If you have connected the DIR-508L to a cable modem via an Ethernet cable, your Internet should be connected and ready
for use. The Internet icon will be blue and the connection will have a check mark . If you have connected the DIR-508L to an
xDSL modem via an Ethernet cable but can not access the Internet, you may click on the Internet icon to start the wizard. You
will need to input the Username and Password as provided by your Internet Service Provider.
PPPoE wizard steps here with screens to the right.
