D-Link ShareCenter Pulse DNS-320 User Manual Download Page 158

Page: 158 / 223

154

D-Link ShareCenter DNS-320 User Manual

Section 4 - Configuration

AFP Service

Click

Application Management

AFP Service.

Click the

Enable

radio button to turn AFP service on.

Click

Save Settings

Click

Application Management

NFS Service.

Click the

Enable

radio button to turn NFS service on.

Click

Save Settings

The ShareCenter supports Apple Filing Service for connectivity with Mac OS® based computers. If you need to use AFP service enable it here

otherwise leave it disabled to reduce CPU resource overhead.

NFS Service

The ShareCenter supports Network File System (NFS) service. To enable this multi-platform file system on your ShareCenter enable it here. Otherwise

disable the option to prevent unnecessary CPU overhead.

Summary of Contents for ShareCenter Pulse DNS-320
































































































































































































































Search results

Summary of Contents for ShareCenter Pulse DNS-320

Reviews:

Related manuals for ShareCenter Pulse DNS-320

Brands by name

Popular brands

D-Link ShareCenter Pulse DNS-320, User Manual

Search results

Summary of Contents for ShareCenter Pulse DNS-320

Reviews:

Related manuals for ShareCenter Pulse DNS-320

Brands by name

Popular brands