D-Link ShareCenter DNS-315 User Manual Download Page 168

Page: 168 / 218

163

D-Link ShareCenter DNS-315 User Manual

The Firmware Upgrade Page makes it simple to check for new firmware releases and upload them to the device. This section

provides a link to check for new firmware on the D-Link support website. If a new firmware is available, download the file to

your local computer.

Current

Firmware

Version

This is the installed firmware that the ShareCenter uses to boot up on and is operating on.

Firnware

Date

This shows the date of when the firmware, the SharCenter is using, was created.

Firmware

Upload

When upgrading the firmware, click Browse to select the new firmware file on your local computer. Click Apply to begin the

firmware upgrade process.

System Management - Firmware Upgrades

Summary of Contents for ShareCenter DNS-315



























































































































































































































Search results

Summary of Contents for ShareCenter DNS-315

Reviews:

Related manuals for ShareCenter DNS-315

Brands by name

Popular brands

D-Link ShareCenter DNS-315, User Manual

Search results

Summary of Contents for ShareCenter DNS-315

Reviews:

Related manuals for ShareCenter DNS-315

Brands by name

Popular brands