58
D-Link DAP-X2810 User Manual
Section 3 - Configuration
Filters
This page allows the user to configure Wireless MAC ACL settings for access control.
Wireless Band:
Access Control List:
SSID Index:
MAC Address:
MAC Address List:
Current Client
Information:
Upload File:
Load MAC File to Local
Hard Driver:
Save:
Displays the current wireless band rate.
Select
Disable
to disable the filters function.
Select
Accept
to accept only those devices with MAC addresses in the
Access Control List. All other devices not on the list will be rejected.
Select
Reject
to reject the devices with MAC addresses on the Access
Control List. All other devices not on the list will be accepted.
Click the drop-down menu to select the SSID for the specified wireless
band.
Enter each MAC address that you wish to include in your filter list, and
click
Apply
.
When you enter a MAC address, it appears in this list. Highlight a MAC
address and click Delete to remove it from this list.
This table displays information about all the current connected stations.
To upload an ACL list fle, click Browse and navigate to the ACL list file
saved on the computer, and then click Upload.
To download the ACL list, click Download and to save the ACL list.
Click to save the updated configuration. To make the updates
permanent, click Configuration >
Save and Activate.
Wireless MAC ACL
