D-Link NUCLIAS CONNECT User Manual Download Page 30

Page: 30 / 96

D-Link DAP-X2810 User Manual

Section 3 - Configuration

The Port List tab displays the current ports. If you want to configure the guest and internal networks on a Virtual LAN (VLAN), the switch and

DHCP server you are using must also support VLANs. As a prerequisite step, configure a port on the switch for handling VLAN tagged packets as

described in the IEEE 802.1Q standard.

VLAN Status:

VLAN Mode:

Save:

Port Name:

Tag VID:

Untag VID:

PVID:

Use the radio button to toggle to Enable. Next, go to

the Add/Edit VLAN tab to add or modify an item on

the VLAN List tab.

Displays the current VLAN mode.

Click to save the updated configuration. To make the

updates permanent, click Configuration >

Save and

Activate

The name of the port is displayed in this column.

The Tagged VID is displayed in this column.

The Untagged VID is displayed in this column.

The Port VLAN Identifier is displayed in this column.

Port List

Summary of Contents for NUCLIAS CONNECT

































































































Search results

Summary of Contents for NUCLIAS CONNECT

Reviews:

Related manuals for NUCLIAS CONNECT

Brands by name

Popular brands

D-Link NUCLIAS CONNECT, User Manual

Search results

Summary of Contents for NUCLIAS CONNECT

Reviews:

Related manuals for NUCLIAS CONNECT

Brands by name

Popular brands