D-Link NUCLIAS CONNECT DAP-2680 User Manual Download

Page: 81 / 97

D-Link DAP-2680 User Manual

Web User Interface

SNMP Settings

Status

Check the box to enable the SNMP functions.

Public Community String

Enter the public SNMP community string.

Private Community

String

Enter the private SNMP community string.

Trap Status

Check the box to enable the trap function.

Trap Server

Enter the trap server IP address.

Note:

To save the new configuration settings to the firmware, click

Configuration

Save and Activate

, otherwise click

Discard Changes

delete any setting change.

Ping Control Setting

Status

Check the box to enable the ping control

setting.

Note:

To save the new configuration settings to the firmware, click

Configuration

Save and Activate

, otherwise click

Discard Changes

delete any setting change.

LED Settings

LED Status

Click the radio button to select the LED on or off.

Note:

To save the new configuration settings to the firmware, click

Configuration

Save and Activate

, otherwise click

Discard Changes

delete any setting change.

Summary of Contents for NUCLIAS CONNECT DAP-2680


































































































Search results

Summary of Contents for NUCLIAS CONNECT DAP-2680

Reviews:

Related manuals for NUCLIAS CONNECT DAP-2680

Brands by name

Popular brands

D-Link NUCLIAS CONNECT DAP-2680, User Manual

Search results

Summary of Contents for NUCLIAS CONNECT DAP-2680

Reviews:

Related manuals for NUCLIAS CONNECT DAP-2680

Brands by name

Popular brands