manualshive.com logo in svg

D-Link NUCLIAS CONNECT DAP-2680, User Manual, Page: 49 / 97

Share
Download
D-Link NUCLIAS CONNECT DAP-2680 User Manual Download Page 49

49

D-Link DAP-2680 User Manual

Web User Interface

IP Address

Assign a static IP address that is within the IP address range of your network.

Subnet Mask

Enter the subnet mask. All devices in the network must share the same subnet mask.

Gateway

Enter the IP address of the gateway/router in your network.

DNS

Enter a DNS server IP address. This is usually the local IP address of your gateway/router.

Passcode Quantity

Enter the number of ticket that will be used.

Duration

Enter the duration value, in hours, for this passcode.

Last Active Time

Select the last active date for this passcode. Year, Month and Day selections can be made.

User Limit

Enter the maximum amount of users that can use this passcode at the same time.

Add

Click to create a defined rule.

Clear

Click to remove the settings from the menu interface.

Delete All

Click to delete all passcode setting entries.

Edit

Click to edit the selected entry.

Delete

Click to delete the selected entry.

Save

Click to save the updated configuration. To make the updates permanent, click 

Configuration > Save and Activate

.

Summary of Contents for NUCLIAS CONNECT DAP-2680


































































































Reviews:

No comments