Hardware Overview
Status LED
Outlet
Reset Button
Front View
WPS Button
ON/OFF Button
& Power LED
WPS
Blinking Green
Press for one second to start the WPS
connection process. The Status LED will start
to blink green.
Reset
Solid Red
Press and hold until the Status LED turns red
in order to reset the device back to the factory
default settings
(for about 10 seconds)
.
ON/OFF Button
Press to turn the device connected to the DSP-W110
ON
or
OFF.
Status LED
Solid Green
The Smart Plug is successfully connected to
your network.
Blinking Green
The WPS process is in progress.
Blinking Orange
The Smart Plug is not properly connected to
your wireless network.
Solid Red
The Smart Plug is powering on, attempting to
reset, or the device is defective.
Off
If the Smart Plug will not power on, try
plugging the Smart Plug into another outlet.
Power LED
Solid Green
The electronic device you plugged into your
Smart Plug is powered on.
Off
The device you plugged into your Smart Plug
is turned off or not receiving power.
Outlet
Connect your appliances, lamps, and other electronic devices you
wish to control.
4