35
D-Link KVM-440/450 User Manual
Section 3 - Operation
Auto-Scan.in.OSD:.<F2>
Enter.the..Auto-scan.mode.in.OSD
Press
<F2>
from the OSD main menu. The auto-scan banner will be shown to indicate the scanning channel.
Note:
You can also enter the auto-scan mode via hotkey using
<Scroll Lock> <Scroll Lock> <S> <Enter>
outside the
OSD mode. Please refer to the
Enter the
Auto-Scan Mode
section.
Exit.the.Auto-scan.Mode
Press any key on keyboard to
STOP.
the auto-scan function. The auto-scan banner will disappear when the scan stops.
Auto-scan.Mode
There are two auto-scan modes, please refer to the
Setup.in.OSD.–.Scan.Mode
section to set up the auto-scan mode.
1. Scan all computers which are power on.
2. Scan all computers which are marked for auto-scan.
Auto-scan.Time.Interval
The auto-scan time interval can be adjusted by pressing
<F1>
from the OSD main menu. Please refer to
Setup.in.OSD.–.Scan.
Time
.
Channel Name
Channel Number
Indicates Scan Mode
Figure.22.-.Auto.Scan.Banner
Summary of Contents for KVM-440
Page 1: ......
