D-Link G120 - DNS NAS Server Manual Download Page 13

Page: 13 / 59

DNS-G120 User’s Manual

D-Link Systems, Inc.

This screen appears when the WEP or WPA

key has been assigned. Follow the directions

on the screen to transfer settings to the USB

ﬂ ash drive.

This screen appears after the settings are

successfully transferred to the USB ﬂ ash drive.

Follow the directions on the screen.

When inserting the USB ﬂ ash drive into the

USB port on the DNS-G120, the USB LED will

blink as it detects the USB ﬂ ash drive and then

turn off. The USB LED will then blink quickly 3

times and turn off again. Once the USB light

is solid and the WLAN light blinks, you may

unplug the USB ﬂ ash drive.

When the DNS-G120 wireless setup is

successful, a window similar to this one will

appear.

You have completed the wireless conﬁ guration

of the DNS-G120.

Windows

Connect Now (Continued)

Windows Connect Now

Click

Next.

Click

Next.

Click

Finish.

Summary of Contents for G120 - DNS NAS Server




























































Search results

Summary of Contents for G120 - DNS NAS Server

Reviews:

Related manuals for G120 - DNS NAS Server

Brands by name

Popular brands

D-Link G120 - DNS NAS Server, Manual

Search results

Summary of Contents for G120 - DNS NAS Server

Reviews:

Related manuals for G120 - DNS NAS Server

Brands by name

Popular brands