D-Link Express EtherNetwork DI-604 Manual Download Page 26

Page: 26 / 88

-26-

HOME > DHCP

DHCP stands for Dynamic Host Control Protocol. The DI-604 has a built-in

DHCP server. The DHCP Server will automatically assign an IP address to

the computers on the LAN/private network. Be sure to set your computers

to be DHCP clients by setting their TCP/IP settings to “Obtain an IP

Address Automatically.” When you turn your computers on, they will

automatically load the proper TCP/IP settings provided by the DI-604. The

DHCP Server will automatically allocate an unused IP address from the IP

address pool to the requesting computer. You must specify the starting

and ending address of the IP address pool.

Starting IP Address:

The starting IP address for the DHCP server’s IP

assignment.

Ending IP Address:

The ending IP address for the DHCP server’s IP

assignment.

Lease Time:

The length of time for the IP lease.

Summary of Contents for Express EtherNetwork DI-604

























































































Search results

Summary of Contents for Express EtherNetwork DI-604

Reviews:

Related manuals for Express EtherNetwork DI-604

Brands by name

Popular brands

D-Link Express EtherNetwork DI-604, Manual

Search results

Summary of Contents for Express EtherNetwork DI-604

Reviews:

Related manuals for Express EtherNetwork DI-604

Brands by name

Popular brands