D-Link Eagle Pro Al R12 Manual Download Page 9

Page: 9 / 148

D-Link R12 User Manual

Section 1 - Product Overview

Hardware Overview

LED Indicators

Power

Solid White

The device is on and the system is healthy.

Solid Orange

The device is booting up or performing factory reset.

Blinking Orange &

White Alternately

The device is undergoing the firmware upgrade process.

Internet

Solid White

The Internet connection is established.

Orange

The device cannot connect to the Internet.
The device is performing firmware upgrade if the above Power LED is
flashing at the same time.

Wireless

(2.4 GHz)

Solid White

The 2.4 GHz wireless band is enabled.

Blinking White

The device is transmitting data. It is processing WPS if the below 5 GHz
LED is blinking at the same time.

Wireless

(5 GHz)

Solid White

The 5 GHz wireless band is enabled.

Blinking White

The device is transmitting data. It is processing WPS if the above 2.4 GHz
LED is blinking at the same time.

Summary of Contents for Eagle Pro Al R12





















































































































































Search results

Summary of Contents for Eagle Pro Al R12

Reviews:

Related manuals for Eagle Pro Al R12

Brands by name

Popular brands

D-Link Eagle Pro Al R12, Manual

Search results

Summary of Contents for Eagle Pro Al R12

Reviews:

Related manuals for Eagle Pro Al R12

Brands by name

Popular brands