16
D-Link E15 User Manual
Section 3 - Configuration
Wireless Setup Wizard
To access the setup utility on your PC, first connect to the E15 wirelessly using the
Wi-Fi name (SSID) and password located on the back of your E15. Then open a web
browser and enter
http://
XXXX
.devicesetup.net/
in your browser’s URL field (where
“xxxx” are the last four digits of the E15’s MAC address).
If this is your first time logging in to the extender and no connection has been
established, the setup wizard will automatically appear. If the setup process was
not previously completed, then enter the default device password printed on the
device label on the back of the E15
The setup wizard is designed to guide you through a step-by-step process to configure your new E15 to extend your wireless network
and connect to the Internet via a wireless setup process. To set your E15 using an Ethernet cable, please refer to “Access Point Mode
Note:
The Wi-Fi name (SSID), Wi-Fi password, web configuration address, and
device password are printed on the device label on the back of the device.
