manualshive.com logo in svg

D-Link DXS-3600-32S, Reference Manual

Share
Download
D-Link DXS-3600-32S Reference Manual Download Page 42

DXS-3600-32S 10GbE Layer 2/3 Switch Web UI Reference Guide

37

Port

Event description: port linkup
Log Message: Port <port> link up, <nway>

Parameters description:
port: Represents the logical port number.
nway: Represents the speed and duplex of link.

Informational

Event description: port linkdown
Log Message: Port <port> link down

Parameters description:
port: Represents the logical port number.

Informational

DLMS

Event Description: Input an illegal activation code.
Log Message: Illegal activation code (AC: <string25>). 

Parameters Description:
<string25>: Activation Code

Informational

Event Description: License Expired.
Log Message: License expired (license:<license-model>, AC: <string25>).

Parameters Description:
<license-model>: License Model Name.
<string25>: Activation Code

Critical

Event Description: License successfully installed.
Log Message: License successfully installed (license:<license-model>, AC: 
<string25>).

Parameters Description:
<license-model>: License Model Name.
<string25>: Activation Code

Informational

Event Description:The Activation Code is unbound.
Log Message: Unbound Activation Code (AC: <string25>).

Parameters Description:
<string25>: Activation Code

Critical

Event Description:When a license is going to expire, it will be logged before 
30 days. 
Log Message: License will expire in 30 days. (license:<license-model>, AC: 
<string25>).

Parameters Description:
<license-model>: License Model Name.
<string25>: Activation Code

Informational

Peripheral

Event description: Fan Recovered .
Log Message: Unit <id>, Fan <id> recovered

Parameters description:
Unit <id>: The unit ID.
Fan <id>: The FAN ID.

Critical

Event description: Fan Fail 
Log Message: Unit <id>, Fan <id> failed.

Parameters description:
Unit <id>: The unit ID.
Fan <id>: The FAN ID.

Critical

Category

Log Description

Severity

Note

Summary of Contents for DXS-3600-32S














































Reviews:

No comments

Brands by name

Popular brands

Load more brands