manualshive.com logo in svg

D-Link DXS-3600-32S, Reference Manual

Share
Download
D-Link DXS-3600-32S Reference Manual Download Page 33

DXS-3600-32S 10GbE Layer 2/3 Switch Web UI Reference Guide

28

Event description: The number of bgp prefix received from this neighbor 
reaches the threshold.
Log Message: [BGP(8):] The number of prefix received reaches <num>, 
max <limit> (Peer < ipaddr >).

Parameters description:
num: The number of prefix received.
limit: Max number of prefix allowed to receive.
ipaddr: IP address of BGP peer.

Warning

Event description: The total bgp prefix number received exceeds the limit.
Log Message: [BGP(9):] The total number of prefix received reaches max 
prefix limit.

Warning

Event description: BGP received unnecessary AS4-PATH attribute from 
new 4-bytes AS BGP peer
Log Message: [BGP(10):] Received AS4-PATH attribute from new (4-bytes 
AS) peer. (Peer <ipaddr>).

Warning

Event description: BGP received unnecessary AS4-AGGREGATOR 
attribute from new 4-bytes AS BGP peer
Log Message: [BGP(11):] Received AS4-AGGREGATOR attribute from new 
(4-bytes AS) peer. (Peer <ipaddr>).

Warning

Event description: BGP received AS_CONFED_SEQUENCE or 
AS_CONFED_SET path segment type in AS4-PATH attribute.
Log Message: [BGP(12):] Received AS_CONFED_SEQUENCE or 
AS_CONFED_SET path segment type in AS4-PATH attribute. (Peer 
<ipaddr>).

Warning

Event description: BGP received invalid AS4-PATH attribute.
Log Message: [BGP(13):] Received invalid AS4-PATH attribute. Value : 
<STRING> (Peer <ipaddr>).

Warning

Event description: BGP received invalid AS4- AGGREGATOR attribute.
Log Message: [BGP(14):] Received invalid AS4- AGGREGATOR attribute. 
Value : <STRING> (Peer <ipaddr>).

Warning

SNMP

Event Description: SNMP request received with invalid community string
Log Message: SNMP request received from <ipaddr> with invalid 
community string.

Parameters Description:
ipaddr: The IP address.

Informational

OSPFv2

Event description: OSPF interface link state changed.
Log Message: OSPF interface <intf-name> changed state to [Up | Down] 

Parameters description:
intf-name: Name of OSPF interface.

Informational

Event description: OSPF interface administrator state changed.
Log Message: OSPF protocol on interface <intf-name> changed state to 
[Enabled | Disabled] 

Parameters description:
intf-name: Name of OSPF interface.

Informational

Event description: One OSPF interface changed from one area to another.
Log Message: OSPF interface <intf-name> changed from area <area-id> to 
area <area-id>

Parameters description:
intf-name: Name of OSPF interface.
area-id: OSPF area ID.

Informational

Category

Log Description

Severity

Note

Summary of Contents for DXS-3600-32S














































Reviews:

No comments

Brands by name

Popular brands

Load more brands