manualshive.com logo in svg

D-Link DXS-3600-32S, Reference Manual

Share
Download
D-Link DXS-3600-32S Reference Manual Download Page 40

DXS-3600-32S 10GbE Layer 2/3 Switch Web UI Reference Guide

35

Event description: Broadcast storm cleared.
Log Message: <interface-id> Broadcast storm has cleared.

Parameters description:
interface-id: The interface name.

Informational

Event description: Multicast storm occurrence.
Log Message: <interface-id> Multicast storm is occurring.

Parameters description:
interface-id: The interface name.

Warning

Event description: Multicast Storm cleared.
Log Message: <interface-id>Multicast storm has cleared.

Parameters description:
interface-id: The interface name.

Informational

Event description: Unicast storm occurrence.
Log Message: <interface-id> Unicast storm is occurring.

Parameters description:
interface-id: The interface name.

Warning

Event description: Unicast Storm cleared.
Log Message: <interface-id> Unicast storm has cleared.

Parameters description:
interface-id: The interface name.

Informational

Event description: Port shut down due to a packet storm
Log Message: <interface-id> is currently shut down due to a packet storm. 

Parameters description:
interface-id: The interface name.

Warning

MSTP Debug

Event description: Topology changed.
Log Message: Topology changed [( [Instance:<InstanceID> ] ,port:< 
portNum> ,MAC: <macaddr>)]

Parameters description:
InstanceID: Instance ID.
portNum:Port ID
macaddr: MAC address

Notice

Event description: Spanning Tree new Root Bridge 
Log Message: [CIST | CIST Regional | MSTI Regional]  New Root bridge 
selected( [Instance: <InstanceID> ]MAC: <macaddr> Priority :<value>)

Parameters description:
InstanceID: Instance ID.
macaddr: Mac address
value: priority value

Informational

Event description: Spanning Tree Protocol is enabled 
Log Message: Spanning Tree Protocol is enabled

Informational

Event description: Spanning Tree Protocol is disabled 
Log Message: Spanning Tree Protocol is disabled

Informational

Event description:  New root port 
Log Message: New root port selected [( [Instance:<InstanceID> ], port:< 
portNum>)]

Parameters description:
InstanceID: Instance ID.
portNum:Port ID

Notice

Category

Log Description

Severity

Note

Summary of Contents for DXS-3600-32S














































Reviews:

No comments

Brands by name

Popular brands

Load more brands