D-Link DWS-4000 Series, Cli Command Reference

Page: 417 / 566

409
Utility Commands
S e c t i o n 8 : U t i l i t y C o m m a n d s
This section describes the utility commands available in the Unified Switch CLI.
The Utility Commands section includes the following subsections:
• “Dual Image Commands” on page 409
• “System Information and Statistics Commands” on page 410
• “Logging Commands” on page 426
• “System Utility and Clear Commands” on page 430
• “SNTP and Clock Commands” on page 436
• “SNTP and Clock Commands” on page 436
• “DHCP Server Commands” on page 442
• “DNS Client Commands” on page 452
• “Serviceability Packet Tracing Commands” on page 456
• “Cable Test Command” on page 466
• “sFlow Commands” on page 467
• “AutoInstall Commands” on page 471
D
UAL
I
MAGE
C
OMMANDS
Unified Switch software supports a dual image feature that allows the switch to have two software images in the permanent
storage. You can specify which image is the active image to be loaded in subsequent reboots. This feature allows reduced
down-time when you upgrade or downgrade the software.
delete
This command deletes the supplied image file from the permanent storage. The image to be deleted must be a backup
image. If this image is the active image, or if this image is activated, an error message displays.
Note: The commands in this section are in one of four functional groups:
• Show commands display switch settings, statistics, and other information.
• Configuration commands configure features and options of the switch. For every configuration command,
there is a show command that displays the configuration setting.
• Copy commands transfer or save configuration and informational files to and from the switch.
• Clear commands clear some or all of the settings to factory defaults.
Format
delete {image1 | image2}
Mode Privileged EXEC