Click Advanced Settings to reveal more settings.
Mode: PPPoE (Advanced Settings)
Limit Retry Time: Whether or not to limit the retry time on a failed PPPoE connection.
Ticking the box displays other options on the page, and these are documented below.
PPPoE PassThrough: Whether to enable or disable PPPoE passthrough. This allows a
PPPoEenabled device connected to the DWR-956M to connect to the PPPoE session
supplied by the ISP. Tick this to enable PPPoE passthrough.
Enable Dual Lan: Whether to enable or disable the dual LAN feature. Tick this to enable
dual LAN.
Ticking the box displays other options on the page, and these are documented below.
Bound Ports: These are the ports that are bound and that can share the same service
type.
Note
: A greyed-out port means it has been bound.
Click
Apply
to save your settings. Click
Back
to cancel and return to the previous screen.
Click
Refresh
to update the current screen.
Interface: ETH
Mode: Bridge
Connection Name: Assign a name for the connection here.
Enable: Tick this to enable this connection, and un-tick it to disable it.
IP Protocol Type: The IP protocol version used by the WAN connection. This can be
IPv4
,
IPv6
or
IPv4&6
. Choosing one of these options displays other options on the page, and each of these is
documented below.
Enable VLAN: Whether to enable or disable VLAN settings on the WAN connection.
Choosing this option displays other options on the page, and each of these is documented below.
Service Type: The service type for the WAN connection. This can be
