DWR-921
4G LTE Router
User Manual
Configuring via Web-based Interface
To remove a subnet, select the checkbox located to the left of the relevant line in the table and click
the
DELETE
button (
). Also you can remove a subnet in the editing window.
After configuring all needed settings for the IPsec tunnel, click the
APPLY
button.
To edit the parameters of an existing tunnel, in the
Tunnels
section, select the relevant tunnel in
the table. On the opened page, change the needed parameters and click the
APPLY
button.
To disconnect an existing tunnel and establish it again, select the checkbox located to the left of the
relevant line in the table and click the
RECONNECT
button.
To remove an existing tunnel, select the checkbox located to the left of the relevant line in the table
and click the
DELETE
button (
). Also you can remove a tunnel on the editing page.
To disable VPN tunnels based on IPsec protocol, click the
DISABLE
button.
Page
137
of 255
