DWR-921
4G LTE Router
User Manual
Configuring via Web-based Interface
Creating Mobile Internet WAN Connection
If the PIN code check is enabled for the SIM card inserted into the built-in LTE modem, for correct
operation of the mobile WAN connection click the
ENTER PIN
button in the notification in the top
right corner of the page and enter the PIN code in the window displayed. Then on the connection
creation page, in the
General Settings
section, select the relevant value from the
Connection
type
drop-down list and specify the needed values.
Figure 86. The page for creating a new
Mobile Internet
connection. The
General Settings
section.
Parameter
Description
Connection name
A name for the connection for easier identification.
Enable connection
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
Use as interface
Move the switch to the right in order to create a network interface
for this connection, for example, to combine several interfaces into
a transparent connection.
NAT
If the switch is moved to the right, the network address translation
function for IPv4 is enabled. Do not disable the function unless your
ISP requires this.
The switch is displayed when the
IPv4
or
Dual
value is selected
from the
Type
drop-down list in the
Modem Settings
section.
Page
100
of 255
