D-Link DWR-730/TK User Manual Download

Page: 75 / 75

D-Link DWR-730 User Manual

Appendix D - Safety

Specific.Absorption.Rate.(SAR)

This mobile device is a radio transmitter and receiver. It is not designed to exceed the limits for exposure to radio waves recommended by

international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins

designed to assure the protection of all persons, regardless of age and health.

The guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR.

The SAR limit for mobile devices is 2 W/kg and the highest SAR value for this device when tested complied with this limit.

To comply with radiofrequency radiation (RF) exposure guidelines during body worn operation, this device must be used with a minimum of 1.5

cm separation from the body.

Failure to observe these instructions could result in your RF exposure exceeding the relevant guideline limits.

Warnings and Declarations

Summary of Contents for DWR-730/TK












































































Search results

Summary of Contents for DWR-730/TK

Reviews:

Related manuals for DWR-730/TK

Brands by name

Popular brands

D-Link DWR-730/TK, User Manual

Search results

Summary of Contents for DWR-730/TK

Reviews:

Related manuals for DWR-730/TK

Brands by name

Popular brands