D-Link DWR-730/TK User Manual Download

Page: 65 / 75

D-Link DWR-730 User Manual

Section 4 - Connecting to a Wireless Network

Connect to a Wireless Network

Using Windows

Windows

XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack 2 users. If you are

using another company’s utility or Windows

2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless

network. Most utilities will have a “site survey” option similar to the Windows

XP utility as seen below.

Right-click on the wireless computer icon in your system tray (lower-right corner

next to the time). Select

View Available Wireless Networks

If you receive the

Wireless Networks Detected

bubble, click on the center of the

bubble to access the utility.

The utility will display any available wireless networks in your area. Click on a

network (displayed using the SSID) and click the

Connect

button.

If you get a good signal but cannot access the Internet, check the TCP/IP settings for

your wireless adapter. Refer to “Networking Basics” on page 68 for more information.

Summary of Contents for DWR-730/TK












































































Search results

Summary of Contents for DWR-730/TK

Reviews:

Related manuals for DWR-730/TK

Brands by name

Popular brands

D-Link DWR-730/TK, User Manual

Search results

Summary of Contents for DWR-730/TK

Reviews:

Related manuals for DWR-730/TK

Brands by name

Popular brands