42
D-Link DWR-712 User Manual
Section 3 - Configuration
SNMP
Select whether to
Enable
or
Disable
local SNMP
administration.
Select whether to
Enable
or
Disable
remote SNMP
administration.
Enter the password
public
in this field to allow read-only
access to network administration using SNMP. You can view
the network, but no configuration is possible with this setting.
Enter the password
private
in this field to enable
read/write access to the network using SNMP.
Enter up to 4 IP addresses to use as trap targets for your
network.
Select the SNMP version of your system.
If you want to limit remote access SNMP access, enter the IP
address of the remote computer you will use to access this
device. All other IP addresses will be denied remote SNMP
access.
SNMP
SNMP Local:
SNMP Remote:
Get Community:
Set Community:
IP 1, IP 2, IP 3, IP 4:
SNMP Version:
WAN Access IP Address
SNMP
(Simple Network Management Protocol) is a widely used network monitoring and control protocol that reports activity on each network
device to the administrator of the network. SNMP can be used to monitor traffic and statistics of the DWR-712. The DWR-712 supports SNMP v1
and v2c. After modifying any settings, click
Save Settings
to save your changes.
Summary of Contents for DWR-712
Page 1: ...USER MANUAL ...
