D-Link DWR-712 User Manual Download

Page: 42 / 89

D-Link DWR-712 User Manual

Section 3 - Configuration

MAC Address Filter

MAC FILTERING SETTINGS

Tick this box to enable MAC Filtering.

Wireless and wired clients with

selected can connect to this

device and

allow/deny

connections from unspecified MAC

addresses.

Wireless clients with

selected can associate to the wireless

LAN and

allow/deny

connections from unspecified MAC

addresses.

MAC FILTERING RULES

This identifies the rule.

Specify the MAC Address of the computer to be filtered.

Specify the last section of the IP address.

Click

Trigger

to configure Wake On LAN.

If this box is ticked, the rule will follow the connection control

setting specified in MAC filtering settings specified above.

If this box is ticked, the rule will follow the association control

setting specified in MAC filtering settings specified above.

MAC Address Control:

Connection Control:

Association Control:

ID:

MAC Address:

IP Address:

Wake On LAN:

The

MAC (Media Access Controller) Address Filter

option is used to control network access based on the MAC Address of the network adapter.

A MAC address is a unique ID assigned by the manufacturer of the network adapter. This feature can be configured to ALLOW or DENY network/

Internet access. After modifying any settings, click

Save Settings

to save your changes.

Summary of Contents for DWR-712


























































































Search results

Summary of Contents for DWR-712

Reviews:

Related manuals for DWR-712

Brands by name

Popular brands

D-Link DWR-712, User Manual

Search results

Summary of Contents for DWR-712

Reviews:

Related manuals for DWR-712

Brands by name

Popular brands