D-Link DWR-712 User Manual Download | Manualshive

Page: 10 / 89

background image

6

D-Link DWR-712 User Manual

Section 2 - Installation

Connect to Your Network

Installation

This section will guide you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area

such as a closet, cabinet, or in an attic or garage.

1. Ensure that your DWR-712 HSPA+ 3G Router is disconnected and powered off.

2. Insert a standard (U)SIM card into the SIM card slot on the back of the router as indicated by the SIM card logo next to the slot. The gold contacts

should face downwards.

Caution:

Always unplug/power down the router before installing or removing the SIM card. Never insert or remove the SIM card while the router

is in use.

3. Insert your Internet/WAN network cable into the WAN port on the back of the router.

Note:

The 3G connection can also be used as a backup WAN. Once a backup is configured, the router will automatically use 3G for the Internet

connection if the Ethernet WAN is not available.

4. Insert the Ethernet cable into the LAN Port 1 on the back panel of the DWR-712 HSPA+ 3G Router and an available Ethernet port on the network

adapter in the computer you will use to configure the router.

Note:

The DWR-712 HSPA+ 3G Router LAN Ports are Auto-MDI/MDIX, so both patch and crossover Ethernet cables can be used.

5. Connect the power adapter to the socket on the back panel of your DWR-712 HSPA+ 3G Router. Plug the other end of the power adapter into

a wall outlet or power strip and turn the device on.

a.  The Status LED will light up to indicate that power has been supplied to the router.
b.  The LEDs on the front panel will flash on and off as the DWR-712 HSPA+ 3G Router performs initialization and Internet connection processes.
c.  After a few moments, if a connection has been established, the following LEDs will turn solid green: Power, Status, WAN, WLAN, and any LAN

Port LEDs that are connected computers or other devices.

«
...
8
9
10
11
12
...
»

Summary of Contents for DWR-712


























































































Reviews:

No comments

Related manuals for DWR-712

DVG-G1402S - Wireless Broadband VoIP Router

Brand: D-Link Pages: 6

Brand: D-Link Pages: 6

Brand: D-Link Pages: 12

Brand: D-Link Pages: 12

Brand: D-Link Pages: 6

Brand: D-Link Pages: 3

Brand: D-Link Pages: 4

Brand: D-Link Pages: 6

Brand: D-Link Pages: 2

Brand: NETGEAR Pages: 22

Brand: Ebyte Pages: 27

Brand: Huawei Pages: 117

Brand: Huawei Pages: 24

Brand: Huawei Pages: 122

Brand: Huawei Pages: 78

Brand: Huawei Pages: 25

Brand: Huawei Pages: 172

Brand: Huawei Pages: 37

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands