Step 3: Click on the Advanced tab at top of the page and then click QOS Engine from the
menu on the leg-‐hand side.
Step 4: Ensure the
Enable QoS Packet Filter
box is checked. Enter your upstream bandwidth
(in Kbps) in the field provided. This will depend on your Internet service plan with your ISP.
Bandwidth is usually stated in a pair indicaLng downlink and uplink speeds, respecLvely (ie:
10M/2M indicates a downlink speed of 10 Mbps and an uplink speed of 2 Mbps, 1 Mbps =
1,024 Kbps).
Step 5: Select a schedule for the QoS packet filter using the
Use schedule rule
drop-‐down
menu. Select ALWAYS ON to have the packet filter permanently enabled. To specify a
custom schedule, use the Schedules opLon from the Tools menu at the top of the page.
Step 6: Example: Set a device (IP address 192.168.1.100) on the local LAN to access web
Summary of Contents for DWR-113
