Step 2
:
Using the paperclip, press and hold the reset bu=on for more than ten seconds. The
power light on the front of the router will turn orange to indicate that the unit is restarLng.
Step 3
:
The unit will reboot automaLcally. Once the power light stops blinking, the unit has
been reset and is ready to use. ReseOng the router does not reset the firmware to an earlier
version, but it will change all seOngs back to factory defaults.
Note:
The factory default username is Admin, and the password field should be leg blank.
11.
How do I set up Website Filtering on my router?
Step 1: Open an Internet browser (such as Internet Explorer) and enter h=p://192.168.0.1
into the address bar. Press Enter.
Step 2: The default username is Admin. Enter the password for your Admin account. If you
have not changed the password from its default, the password field should be leg blank.
Click
Login
.
Summary of Contents for DWR-113
