22
MIBs
Management and counter information are stored by the Midspan in the
Management Information Base (MIB). The DWL-P1012 uses the standard MIB-
II Management Information Base module and Power over Ethernet MIB
(RFC3621). Consequently, values for MIB objects can be retrieved from any
SNMP-based network management software. In addition, the
DWL-P1012 also
supports its own proprietary enterprise MIB as an extended Management
Information Base. The proprietary MIB may also be retrieved by specifying the
MIB Object Identifier. MIB values can be either read-only or read-write.
Enabled / Disabled:
To enable or disable the SNMP function of the DWL-
P1012.
SNMP Community / Trap:
To configure the SNMP Community or SNMP Trap
Host.
Configure SNMP Community:
Add Group:
To add an SNMP Community group, press “Add Group” button. In
the Add SNMP Community configuration window fill in the community name and
assign the community enable read_only or read_write access. Press “Apply”
button to save the configuration.
