D-Link DVX-2004 User Manual Download

Page: 11 / 52

Item

Explanation

Search extension precisely or fuzzily

Show all

Show all extensions

Name

Extension name (English letter is supported only) eg: "Tom"

Extension

Be connected to the phone eg: "888"

Password

Password of SIP/IAX2 extension eg: "12u3b6"

Outbound CID

Overrides the caller id when dialing out with a trunk.

VM Password

Voicemail Password for this user, eg: "1234".

E-mail

The e-mail address for this user, eg. "[email protected]"

Dial Plan

Please choose the Dial Plan for this user

，

Dial Plan is defined

under the "Outbound Routes".

Analog Phone

If this user is attached to an analog port on the system, please

choose the port number here.

Voicemail

This user will have a voicemail account after choosing this option.

Can reinvite

Set up calls directly between caller and receiver, after being

connected by IP PBX system. This method is known to cause

problems with certain hardware, such as the common Cisco ATA

186.

SIP

Check this option if the User or Phone is using SIP or is a SIP

device.

IAX2

Check this option if the User or Phone is using IAX2 or is an IAX2

device.

T.38 Fax

Enables T.38 fax (UDPTL) pass through on SIP to SIP calls

Agent

Check this option if this User or Phone is an Call Agent.

NAT

Check this option if the User or Phone is located behind a NAT

(Network Address Translation) enabled gateway.

Pickup Group

Select your pickup group.

Delete VMail

Voicemail will not be checkable by phone if you choose this option.

Messages will be sent by email only.

Note: You must configure SMTP server for this functionality.

DTMF Mode

The Dual-Tone Multi-Frequency mode to be used is specified here

and can be changed if necessary. The default is rfc2833.

Video Call

Enable/Disable Video call for this extension

Permit IP

IP address and network restriction.

eg: "192.168.1.77" or "192.168.10.0/255.255.255.0"

Auto Provision

Enter the MAC address of the specified extension, the system will

automatically create the config file accordingly. (Just support

DPH150 and DPH400 IP Phone)

Codecs Configure

The allowed and disallowed codecs can be selected by clicking this

link. Default codecs are alaw, ulaw and G.729.

Summary of Contents for DVX-2004





















































Search results

Summary of Contents for DVX-2004

Reviews:

Related manuals for DVX-2004

Brands by name

Popular brands

D-Link DVX-2004, User Manual

Search results

Summary of Contents for DVX-2004

Reviews:

Related manuals for DVX-2004

Brands by name

Popular brands