D-Link DVG-5004S User Manual Download Page 42

Page: 42 / 83

DVG-5004S User’s Manual

VoIP Gateway Configuration

D-Link Systems, Inc.

3-3-9 Calling Features

General Settings

→

Calling Features

Do Not Disturb:

Check the box to reject (busy tone played) incoming calls.

Unconditional Forward:

Check the box to forward incoming calls to the assigned “Forwarding Number”

automatically.

Busy Forward:

Check the box to forward incoming calls to the “Forward incoming Number” when the line is

busy.

No Answer Forward:

Check the box to forward incoming calls to the “Forward incoming Number” after

ringing timeout (configurable from 10 to 60 seconds) expires.

Call Hold:

Check the box to hold the call on the specific FXS port.

Note:

Call Transfer or Call Waiting can only be activated when Call Hold is checked..

Call Transfer:

Check the box to transfer the call to another destination.

Call Waiting:

Check the box to accept incoming call while talking.

Three-Way Calling / Service ID:

It is used for Nortel Style 3-Way conference. Please enter correct service

ID assigned on the SoftSwitch or IPPBX.

Local Mixer:

Enable 3-Way conference mixer on DVG. This option is conflict to “

Three-Way Calling /

Service ID”

, don’t enab;e these two options

simultaneously

Note:

The availability of a Three-Way call also depends on your VoIP network. Please also check with your

service provider for these services.

Summary of Contents for DVG-5004S




















































































Search results

Summary of Contents for DVG-5004S

Reviews:

Related manuals for DVG-5004S

Brands by name

Popular brands

D-Link DVG-5004S, User Manual

Search results

Summary of Contents for DVG-5004S

Reviews:

Related manuals for DVG-5004S

Brands by name

Popular brands