47
Rename alias:
User can create an alias to one device node.
1.
Check the gray button of “OP.” column next to one device node.
2.
Select “Rename alias”.
3.
Create an alias for that device node.
4.
Click “OK” to confirm.
5.
An alias appears at the end of that device node.
Figure 4.3.3.6
Figure 4.3.3.7
Tips
After setting CHAP, the initiator in host should be set with the same CHAP
account. Otherwise, user cannot login.
4.3.4
Session
“Session” can display current iSCSI session and connection information, including the
following items:
1.
TSIH (target session identifying handle)
2.
Host (Initiator Name)
3.
Controller (Target Name)
4.
InitialR2T(Initial Ready to Transfer)
5.
Immed. data(Immediate data)
6.
MaxDataOutR2T(Maximum Data Outstanding Ready to Transfer)
7.
MaxDataBurstLen(Maximum Data Burst Length)
8.
DataSeginOrder(Data Sequence in Order)
9.
DataPDUInOrder(Data PDU in Order)
10.
Detail of Authentication status and Source IP: port number.
