D-Link DSN-6110 Page 29 User Manual Download

Page: 29 / 135

Temperature light:



Green



Temperature is normal.



Red



Temperature is abnormal.

Voltage light:



Green



voltage is normal.



Red



voltage is abnormal.

UPS light:



Green



UPS works well.



Red



UPS fails.

Fan light:



Green



Fan works well.



Red



Fan fails.

Power light:



Green



Power works well.



Red



Power fails.

Dual controller light:



Green



Both controller 1 and controller 2 are present and

well.



Orange



The system is degraded and there is only 1

controller alive and well.

Return to home page.

Logout the management web UI.

Mute alarm beeper.

Tips

If the status indicators in Internet Explorer (IE) are displayed in gray, but
not in blinking red, please enable “Internet Options”



“Advanced”



“Play animations in webpages” options in IE. The default value is

enabled, but some applications will disable it.

Summary of Contents for DSN-6110








































































































































Search results

Summary of Contents for DSN-6110

Reviews:

Related manuals for DSN-6110

Brands by name

Popular brands

D-Link DSN-6110, User Manual

Search results

Summary of Contents for DSN-6110

Reviews:

Related manuals for DSN-6110

Brands by name

Popular brands