D-Link DSM-750 User Manual
Section - Configuration
Wired Setup
Note:
If you choose to connect to a wireless network, please skip to the
Wireless Setup
section on page 27.
For the quickest and easiest installation, it is
highly
recommended that DHCP is enabled. Most networks have DHCP
enabled to allow new devices on the network to connect automatically.
Make sure the DSM-750 is properly connected to your router with the supplied Ethernet cable.
After plugging in the Ethernet cable, plug the end of the DSM-750 power supply cord into a power outlet. Position your
media player so that you can see it from where you view your TV. Power on the DSM-750 by pressing the
Power
button
on the included DSM-750 remote control.
Note:
Make sure your media player is not behind the TV so you can use your DSM-750 remote control.
Using the TV’s remote control, turn on your TV and select the correct audio/video input source. When the correct audio/
video input source is selected, you will see the MediaLounge
™
startup screen or
Optional Set Up
screen.
Note:
If you don’t remember how to change TV inputs, refer to
the TV User Manual for instructions.
Summary of Contents for DSM-750 - MediaLounge High-Definition Draft N Media Player
Page 1: ......