34
D-Link DSL-X1852E User Manual
Section 4 - Configuration
Internet - Ethernet
Your DSL-X1852E is equipped with a multi-purpose Gigabit Ethernet LAN/WAN port which can
be used to connect to the Internet. This port can also be used to connect to other Ethernet
based networks. In order for your DSL-X1852E to use Ethernet, you must configure the WAN
Connection Type and related WAN settings.
Configure your
WAN connection:
Select
Ethernet
to configure Ethernet connection settings.
Service Number:
Select a service number from the drop-down menu, or to create a new
service number for your Ethernet connection, click
Add
. The service
number corresponds to the configured interface profile from your
Ethernet
WAN Connection Type
.
VLAN Settings
Enable Vlan ID:
Enable or disable VLAN settings.
Vlan ID:
Enter the VLAN ID. Enter a value from 1 - 4094.
IPv4 Settings
Connection:
Select the connection method for your Internet and refer to the
respective configuration page for setup information.
For Dynamic IP (DHCP) Address, refer to
.
For Static IP Address, refer to
For PPPoE, refer to
For Bridge Mode, refer to