DSL-G604T Wireless ADSL Router Manual
router. The protocols that may be specifically allowed or denied to pass through the WAN interface
are
IPv4, IPv6, RARP, PPPoE Discovery
and
PPPoE Session.
Click the
Add
button. The rule will
appear in the entry field below as it is currently configured. To remove a bridge filter from the table in
the bottom half of the window, click to select the corresponding
Delete
box, and then click
Apply
.
Remember to save the configuration changes.
Routing
Clicking the
Routing
tab will lead you to this window, which is used to manually enter a routing entry
for the Router. Routing entries are used when known gateways and hops on the network are known to
the user. Unless instructed by your ISP or if you have a greater knowledge of networking, this window
should not be necessary to configure as the LAN IP settings should be sufficient for your connection.
74
Summary of Contents for DSL-G604T
