62
DSL-504T User’s Manual
D-Link Systems, Inc.
Advanced - Filters
Advanced - Filters
Filter rules in the Router are put in place to allow or block specified traffic. The Filter
Rules however can be used in a single direction to examine and then Allow or Deny
traffic for Inbound (WAN to LAN) or Outbound (LAN to WAN) routed data. The rules
based on IP address and TCP/UDP port.
Configure the filter rules as desired and click the Apply button to create the rule. The
newly created rule appears listed in the Outbound Filter List at the bottom of the menu.
The table below describes the various parameters that are configured for the filter rules.
To modify any previously created filter rule, click on the note pad icon in the right hand
column of the Filter List for the set you want to configure. Adjust the settings as desired
and click the Apply button to put the new settings into effect.
First determine the direction of the traffic you want the rule to filter. To filter WAN to LAN
traffic, select the Inbound Filter option. Any new Inbound Filter rules created will appear
in the list. Likewise, should you wish to filter LAN to WAN traffic, create an Outbound
Filter rule.
Summary of Contents for DSL-504T
Page 1: ......