57
DSL-504T User’s Manual
D-Link Systems, Inc.
No DHCP:
Disable DHCP service to manually configure IP settings for
workstations. Click Apply.
DHCP Server Settings for the LAN (continued)
DHCP Server Settings for the LAN
DHCP Server:
Make this selection to use the router as a DHCP server for your
LAN.
Starting IP
Address:
The lowest available IP address. The default IP address is
192.168.1.2. If you change the address of the router, this address
will automatically change to be the next consecutive address.
DHCP Relay:
Make this selection to use the DHCP service provided by your ISP.
Type the DHCP Relay IP address in the space provided. Click Apply.
Ending IP Address:
The highest IP address number in the pool.
Lease Time:
This is the amount of time in seconds that a workstation is allowed
to reserve an IP address in the pool if the workstation is disconnected
from the network or powered off.
The new settings must be saved and the Router must be restarted for the settings to go into
effect. To Save & Reboot the Router, click on the Tools directory tab and then click the Misc
menu button. In the Misc Settings menu, click the Reboot button under Force the DSL-504T to
system restart. The Router will save the new settings and restart. Upon restarting the Router
will automatically establish the WAN connection
Summary of Contents for DSL-504T
Page 1: ......
