DSL-500 Console Commands Index and Syntax
11
ccglobalaccept - toggle auto acceptance/rejection of CC activate requests
pmglobalaccept - toggle auto acceptance/rejection of PM activate requests
segmentset <port> <vpi> <vci> <flags> - set up a segment sink point
segmentclear <port> <vpi> <vci> <flags> - remove a segment sink point
faultset <port> <vpi> <vci> <flags> - turn fault management on
faultclear <port> <vpi> <vci> <flags> - turn fault management off
faultwatch <port> <vpi> <vci> <flags> - turn fault monitoring on
faultunwatch <port> <vpi> <vci> <flags> - turn fault monitoring off
faultbegin <port> <vpi> <vci> <flags> - declare a fault state
faultend <port> <vpi> <vci> <flags> - clear a fault state
ccset
<port> <vpi> <vci> <flags>
- set up reception of activation requests
ccclear
<port> <vpi> <vci> <flags>
- clear reception of activation requests
ccsetauto
<port> <vpi> <vci> <flags>
- set up auto accept of activation requests
ccactivate <port> <vpi> <vci> <flags> <dir> - send activate request
ccdeactivate <port> <vpi> <vci> <flags> <dir>
- send deactivate request
ccstart <port> <vpi> <vci> <flags> <dir>
- start transmission/reception of CC cells
ccstop <port> <vpi> <vci> <flags> <dir>
- stop transmission/reception of CC cells
loopset <port> <vpi> <vci> <flags> <llid> - enable loopback
loopclear <port> <vpi> <vci> <flags> - disable loopback
loop <port> <vpi> <vci> <flags> <llid> - send a loopback cell
loopstats <port> <vpi> <vci> <flags> - display loopback stats
pmset <port> <vpi> <vci> <flags>
- set up reception of activation requests
pmclear <port> <vpi> <vci> <flags>
- clear reception of activation requests
pmsetauto <port> <vpi> <vci> <flags>
- set up auto accept of activation requests
pmactivate <port> <vpi> <vci> <flags> <txblock> <rxblock> <dir>
- send activate request
pmdeactivate <port> <vpi> <vci> <flags> - send deactivate request
pmstart <port> <vpi> <vci> <flags> <txblock> <rxblock> <dir>
- start transmission/reception of PM cells
