DSL-500 Console Commands Index and Syntax
12
pmstop <port> <vpi> <vci> <flags> <dir>
- stop transmission/reception of PM cells
pmstats <port> <vpi> <vci> <flags> - display PM stats
22. portcli
8khzsource [<port> [int|off]] - set source of 8kHz reference signal
errors [diff] - show error counts
help [all|<command>] - print help information
portinfo [<port>] - show port information
portload [<port>] - show port loading
portmode <port>|all uni30|uni31|uni40|iispuser|iispnet|mast|gsmp|ifmp
- set port mode (group of flags)
setportflag <port>|all <portflag> - set port flag
show <port> - show detail information for a port
speed <port> [tx default|<cps>][rx default|cps] - set port speed
stats [diff] - print statistics
unsetportflag <port>|all <portflag> - clear port flag
version - show switch CLI version
vport - add or remove virtual ports
23. ppp
bcp - <channel> bcp stp|nostp:
set if BCP uses spanning tree packets over this
channel
clear - <channel> clear:
clear channel to initial state
disable - <channel> disable:
disable PPP on this channel
discard - <channel> discard [<size>]:
send LCP 'discard' packet
echo - <channel> echo [<size>]:
send LCP 'echo' packet
enable - <channel> enable [pppoe]:
enable this channel with current settings
