55
D-Link DSL-3782 User Manual
Section 4 - Configuration
If you enabled IP filtering, click
Add Rule
to create a new IP filtering rule.
Create New Rule
Name:
Create a name for the rule.
Protocol:
Select the protocol type:
Any
,
UDP
,
TCP
, or
ICMP
.
Source IP Address:
Select
Any
IP address
,
Single IP
, or
Specify IP Address (Range)
. If
you selected
Single IP
or
Specify IP Address (Range)
, enter the IP
address into the
From
and
To
fields.
Destination IP
Address:
Select the destination to apply the rule to:
PVC1
,
PTM
, or
WAN
.
Select
Any
IP address
,
Single IP
, or
Specify IP Address (Range)
. If
you selected
Single IP
or
Specify IP Address (Range)
, enter the IP
address into the
From
and
To
fields.
If you selected
PTM
or
WAN
as the
Destination IP Address
, select the
Service Number
.
Service Number:
Select the Service Number from the drop down menu.
If you selected
UDP
or
TCP
as the
Protocol
above, you may filter
Any Port
,
a Single Port
,
or
Specify a Port Range
.
Schedule:
Use the drop-down menu to select the time schedule that the rule will
be enabled on. The schedule may be set to
Always
, or you can create
your own schedules in the
Schedules
section. Refer to
Schedule
on
page
62
for more information.
Click
Apply
when you are done.
IP Filter (continued)
