D-Link DSL-2745 User Manual Download

Page: 48 / 172

D-Link DSL-2745 Wireless N300 ADSL2+ Modem Router User Manual

Section 4 - Configuration

Modify a 1483 MER Connection

Click

Apply Changes

to have your changes take effect. Click

Return

to discard

your changes and return to the

Internet Setup

page. Click

Undo

to revert back

to the existing settings.

IP Interface:

This shows the current interface being modified.

Protocol:

This shows the current protocol being modified.

ATM VCC:

The shows the current ATM VCC configuration.

Bridge:

Select

Bridged Ethernet (Transparent Bridging)

Bridged

PPPoE(implies Bridged Ethernet)

, or

Disable Bridge

802.1q:

Choose to either

Disable

Enable

the use of VLANs.

VLAN ID(1-4095):

If you enabled 802.1q, enter the VLAN ID.

IP INTERFACE

Summary of Contents for DSL-2745













































































































































































Search results

Summary of Contents for DSL-2745

Reviews:

Related manuals for DSL-2745

Brands by name

Popular brands

D-Link DSL-2745, User Manual

Search results

Summary of Contents for DSL-2745

Reviews:

Related manuals for DSL-2745

Brands by name

Popular brands