D-Link DSL-2740M User Manual Download Page 59

Page: 59 / 105

D-Link DSL-2740M User Manual

Section 3 - Configuration

VLAN

VLAN

ADVANCED

VLAN GROUP SETTING

VLAN Index:

Select the VLAN index from the drop down menu.

Enable VLAN

Group:

Check this box to enable this VLAN group.

VLAN ID:

Enter the VLAN ID.

ATM VCS:

Select the corresponding ATM ports to tag for this VLAN.

Ethernet:

Select the corresponding Ethernet ports to tag for this VLAN.

WLAN:

Select the corresponding WLAN ports to tag for this VLAN.

Click

Apply Settings

when you are done.

Click

VLAN

on the navigation menu to configure your VLAN settings.

The currently defined VLANs are displayed here. If you wish to remove a rule, select it from

the table and click the

Remove Selected

button.

VLAN GROUP SUMMARY

Summary of Contents for DSL-2740M










































































































Search results

Summary of Contents for DSL-2740M

Reviews:

Related manuals for DSL-2740M

Brands by name

Popular brands

D-Link DSL-2740M, User Manual

Search results

Summary of Contents for DSL-2740M

Reviews:

Related manuals for DSL-2740M

Brands by name

Popular brands