17
D-Link DSL-2740M User Manual
Section 3 - Configuration
If you selected Dynamic IP address, configure the following information:
VPI:
Virtual path identifier (VPI) is the virtual path between two
points in an Asynchronous Transfer Network (ATM) network. Its
valid value is between 0 and 255. Enter the correct VPI provided
by your ISP.
VCI:
Virtual channel identifier (VCI) is the virtual channel between
two points in an ATM network. Its valid value is between 32 and
65535. Enter the correct VCI provided by your ISP.
Connection Type:
Select either
1483 Bridged IP LLC
or
1483 Bridged IP VC-
Mux
.
Cloned MAC Address:
If your ISP locks your account to a specific device, you can clone
that device’s MAC address to your DSL-2740M so that you may
connect to the Internet. Click the
Clone MAC Address
button
to clone the MAC address of the device you are currently using
to access to the web configuration utility.
Click
Next
to continue and proceed to step 3.
STEP 2: SELECT INTERNET CONNECTION TYPE
Dynamic IP Address
