manualshive.com logo in svg

D-Link DSL-2641B - Wireless G Router, User Manual, Page: 52 / 84

Share
Download
D-Link DSL-2641B - Wireless G Router User Manual Download Page 52

Section 4 - Troubleshooting 

 

D-Link DSL-2641B User Manual 

 

   

 

 

 

 

 

 

 

 

 

            

52 

ADVANCED ADSL 

The 

ADVANCED ADSL

 settings allow you to choose which ADSL modulation settings your modem router will support. 

D-Link does not recommend changing these settings unless directed to do so by your ISP. 
 
To access the 

ADVANCED ADSL

 setting window, click on the 

Advanced ADSL 

button in the 

ADVANCED

 directory. 

ADVANCED ADSL SETTINGS 

The 

Modulation Type 

drop-down menu allows the user 

to select the configuration for ADSL protocols. For most 
ADSL accounts the default settings (

Auto sense)

 will 

work. This configuration works with all ADSL 
implementations. Do not change any settings unless 
you have been instructed.   
 
To make ADSL settings, select the desired items and 
click on the 

Apply Settings

 button to apply the 

settings. 
 

 

 

 

Summary of Contents for DSL-2641B - Wireless G Router





















































































Reviews:

No comments